App use instructions
When using the app for the first time, tap No Account? Register a new account, then enter your given (first) and last name (surname), email address, and new password (6 digits and/or letters), tick the box next to Read and agree to the Terms and Privacy Policy, and tap Signup (you can skip the fields Doctor ID and Please enter verification code and Send button)
When logging in, you can tick the box Remember the Password to avoid entering the password in the future (do that only if you are a single person with access to the phone/tablet). Tap Welcome to TEA and proceed to the Treatments page. Allow TEA to turn on the Bluetooth, if requested.
Tap Bluetooth Not Connected and wait for popup Searching for Bluetooth devices to disappear. If your TEA device is nearby and is turned on, you will see it listed as MedKinetic TEA. Tap that name and wait for popup Connecting device to disappear and the image of TEA device on the screen to turn grey. You are now connected to the TEA device.
To add a Treatment, tap the + in the top right corner and select one of the Treatments, for example Custom Treatment. If the Custom Treatment is not defined, tap the Edit icon to the right from Custom Treatment and in the popup window, type the Pulse Width (us) from 100 to 500, Frequency (Hz) from 1 to 100, Time On and Time Off (ms) from 100 to 10000, Overall Time (min) from 5 to 240, Current Intensity from 1 to10, and Pulse polarity (select Monophasic or Alternating). Tap Save to create the Custom Treatment. Then tap on the Custom Treatment to select it, which is reflected by the words Custom Treatment TEA1 appearing above the device image on the screen. The selected treatment is automatically sent to the device and is saved for future use, so you don't need to repeat step 4 every time after turning on the device. Instead, go directly to the step 5 or 6.
Apply the treatment using the app: tap the Power button on the device image, it will turn green and the switch on the device display image will change from OFF to ON. Stop the treatment by tapping the Power button again, it will turn white again and the switch on the device display image will change from ON to OFF. Adjust the treatment amplitude by tapping - and + buttons on the device image.
Apply the treatment using the device (alternative to step 5 above): press the Power button on the device, and the switch on the device display will change from OFF to ON. Stop the treatment by pressing the Power button again, and the switch on the device display will change from ON to OFF. Adjust the treatment amplitude by pressing - and + buttons on the device.
Turn off the device by pressing and holding the Power button on the device (for about 4 seconds).